Albrecht Tectalk Instruções de Operação descarregar pdf (Página 2)

2. The Detachable Belt Clip is already attached to your Communicator and locates into the slot on the back of the

unit. If you want to remove the belt clip, press the locking lug at the top away from the unit and slide the belt clip

upwards to remove. To re-install, just slide the belt clip into the slot and snap in place.

LCD PANEL ICON DESCRIPTIONS

1. RSSI (Receiving Signal Strength Indicator) or TX Bar Icon

Indicates the receiving signal strength and blinks during transmission.

2. Monitor Indicator

Appears when the monitor button is used.

3. CTCSS Indicator

Appears when the correct CTCSS tone is entered.

4. Auto Channel Scan Indicator

Appears in the auto scan mode or when the auto scan mode is activated.

5. Dual Watch Scan Indicator

Blinks in dual watch scan mode or Appears when the dual watch scan mode is activated.

6. Key Lock Indicator

Blinks in auto lock selection mode or Appears when the key lock is activated.

7. VOX Indicator

Blinks in VOX selection mode or appears when VOX is activated.

8. Battery Level Indicator

Battery Level Meter indicates the remaining battery strength.

1 2 3 4 5 6 7 8 9

Sem comentários

Albrecht Tectalk Instruções de Operação Página 2